|
|
Manufacture and defects of heavy castings
Vymazal, Aleš ; Čech, Jan (referee) ; Záděra, Antonín (advisor)
Objective of diploma thesis is to proceed analysis of actual technology in operational terms for concrete casting of bearing . Constructed by foundry of steel ŽĎAS a.s., Žďár nad Sázavou. After designing changes in technological process accomplish detail evaluation of mechanical properties and chemical homogenity of metal at selected parts of sample casting.
|
|
|
Manufacture of massive castings and their defects
Doležal, Petr ; Martínek, Ludvík (referee) ; Záděra, Antonín (advisor)
Object of this master’s thesis is accomplished analyze the range of foundry of steel ŽĎAS a.s., Zdar nad Sazavou and make the type massive steel castings and analysis of existing technology foundry and metallurgical defect. The beginning of this master’s thesis is dedicated to the manufacturing of steel foundries range ŽĎAS a.s., Zdar nad Sazavou. The following section is devoted to manufacturing technologies for the production of massive steel castings. In the final part of this thesis are described metallurgical and foundry defects of the typical castings of steel foundry and proposals to eliminate these undesirable defects. End thesis includes a summary of the results and trends in the development of research in the production of massive steel casting.
|
|
|
Metallurgy and properties of heavy steel castings
Kubík, Jiří ; Čech, Jan (referee) ; Záděra, Antonín (advisor)
The work deals with the determination of the chemical composition and morphology of inclusions in experimental casting foundry in operating conditions as ŽĎAS in compliance with the optimum content appropriate deoxidation depending on the conditions of solidification. The introductory part is devoted to theoretical analysis of possible defects in castings. We also describe the experimental casting, sampling sites and their markings. Subsequently evaluated morphology microanalysis inclusions and the effect of inclusions on the mechanical properties and the formation of defects in the casting. The conclusion summarizes the results and proposal for further direction in the production of heavy steel castings.
|
|
|
Optimization of heavy steel castings manufacture
Jankůj, Josef ; Martínek, Ludvík (referee) ; Šenberger, Jaroslav (advisor)
The work deals with the occurrence of cracks and fissures in the massive steel castings produced in the ŽĎAS a.s. foundry which create in castings through the elimination of the extension. The influence on the final deoxidation on the creation of fissures and cracks is researched at the experimental samples. The beginning of the work is about teoretical analysis of these defects. Next it is described the place of the collection of these samples their chemical composition and cracks identification. After that it is evaluated the appearance of various defects in connection with modificatory and deoxidation additive, observation of experimental material with the microscope and the results of mechanical tests. The conclusion of the work belongs to sum up the individual results and proposal of optimal procedure.
|
|
|
Comparison of the activities of the emergency services and military medics Czech Republic
SEDLÁKOVÁ, Aneta
This thesis is focused on the most common injuries that are attended by health care armies workers in the Czech Republic, and also the most common traumas that are attended by ground ambulance. I would like to divide my thesis into two parts. The first part focuses on general information on the structure and training of health professionals AČR and ground ambulance services, but especially for injuries that are most cosistently found in the literature of these two groups. Which are thermal injury, massive bleeding, wounds, traumatic amputations and injuries of the respiratory systém. This theoretical part is followed by data collection, which was conducted using questionnaries and semi-structured interviews, whose filling were participated by twelve randomly selected respondents from across the Czech Republic. Six from the first group and six from the second group. Evaluation of responses and transcribed interviews are presented in the practical part of this thesis. The second part contains a database of the three most common traumas to men between the ages of 18 40. The ambulance services of South Bohemia medical rescue provided a database of three most common injuries. The second source was from health care of armies in the Czech Republic, which were provided to me by the military Hospital in Brno. On evaluation of these databases follows another theoretical part describing traumas. I would like to point out the differences between traumas which have been documented in medical journals and real life trauma situations. From interviewing civilian health care professionals I found out that the most common injuries were too the head, while gunshots and splinter wounds were most common in the military . The information and conclusions are based on the database for both groups, and are representative of attendence of real life emergency situations. The conclusions are consistent with the reality. The survey also revealed that AČR medics generally treat simpler injuries. For example, in terms of intervention during natural disasters, paramedics answered coherently and clearly. To improve this situation more frequent training is required for paramedics in this area. Medics also reported the attendence of a larger number of mandatory courses, while for paramedics, the most of the courses were voluntary. Further research revealed that paramedics often engage in minor cases, whereas health professionals do not.Suggestions for improving these issues could be charging for unnecessary call outs and for patients who repeatedly use the service. It is not easy to solve this problem and I think that the soloutions are currently being trialled. Regarding to access to various injuries, both groups of respondents proceeded according to their own practice and in my opinion, it can not be compared with each other.
|
|
|
Metallurgy and properties of heavy steel castings
Kubík, Jiří ; Čech, Jan (referee) ; Záděra, Antonín (advisor)
The work deals with the determination of the chemical composition and morphology of inclusions in experimental casting foundry in operating conditions as ŽĎAS in compliance with the optimum content appropriate deoxidation depending on the conditions of solidification. The introductory part is devoted to theoretical analysis of possible defects in castings. We also describe the experimental casting, sampling sites and their markings. Subsequently evaluated morphology microanalysis inclusions and the effect of inclusions on the mechanical properties and the formation of defects in the casting. The conclusion summarizes the results and proposal for further direction in the production of heavy steel castings.
|
|
|
Optimization of heavy steel castings manufacture
Jankůj, Josef ; Martínek, Ludvík (referee) ; Šenberger, Jaroslav (advisor)
The work deals with the occurrence of cracks and fissures in the massive steel castings produced in the ŽĎAS a.s. foundry which create in castings through the elimination of the extension. The influence on the final deoxidation on the creation of fissures and cracks is researched at the experimental samples. The beginning of the work is about teoretical analysis of these defects. Next it is described the place of the collection of these samples their chemical composition and cracks identification. After that it is evaluated the appearance of various defects in connection with modificatory and deoxidation additive, observation of experimental material with the microscope and the results of mechanical tests. The conclusion of the work belongs to sum up the individual results and proposal of optimal procedure.
|
|
|
Manufacture and defects of heavy castings
Vymazal, Aleš ; Čech, Jan (referee) ; Záděra, Antonín (advisor)
Objective of diploma thesis is to proceed analysis of actual technology in operational terms for concrete casting of bearing . Constructed by foundry of steel ŽĎAS a.s., Žďár nad Sázavou. After designing changes in technological process accomplish detail evaluation of mechanical properties and chemical homogenity of metal at selected parts of sample casting.
|
|
|
Manufacture of massive castings and their defects
Doležal, Petr ; Martínek, Ludvík (referee) ; Záděra, Antonín (advisor)
Object of this master’s thesis is accomplished analyze the range of foundry of steel ŽĎAS a.s., Zdar nad Sazavou and make the type massive steel castings and analysis of existing technology foundry and metallurgical defect. The beginning of this master’s thesis is dedicated to the manufacturing of steel foundries range ŽĎAS a.s., Zdar nad Sazavou. The following section is devoted to manufacturing technologies for the production of massive steel castings. In the final part of this thesis are described metallurgical and foundry defects of the typical castings of steel foundry and proposals to eliminate these undesirable defects. End thesis includes a summary of the results and trends in the development of research in the production of massive steel casting.
|
guest ::
